Manufacturer Supplier-manufacture,factory,supplier from China

Product IntroductionsGalvanized strip steel coil is a narrow strip steel coil made of cold-rolled or hot-rolled steel sheet as the base material, after forming zinc layer on the surface by hot-dip galvanizing process, and then by strip processing. The production process mainly includes raw material preparation, steel strip pretreatment, hot dip galvanizing, cold rolling forming, strip cutting and other steps. Among them, strip processing is to cut wide galvanized steel coil into specific width strip products by cutting equipment to meet the needs of different application scenarios.

Product IntroductionsHot-dip galvanized steel plate is one of the main production methods used at present.

Product IntroductionsGalvanized strip metal coil is a slim strip metal coil made of cold-rolled or hot-rolled metal sheet as the base material, after forming zinc layer on the floor by means of hot-dip galvanizing process, and then through strip processing. The manufacturing procedure in most cases consists of uncooked cloth preparation, metal strip pretreatment, warm dip galvanizing, bloodless rolling forming, strip slicing and different steps.

Product IntroductionsHot-dip galvanized steel plate is suitable for fabrication by forming, pressing and bending because of its excellent forming property, painting ability, welding ability.

Product IntroductionsGalvanized Aluminum Coil is made of cold-rolled steel sheet and solidified at 5 ° C with 55% aluminum, 43.4% zinc and 1.6% silicon.   It combines the physical protection and high durability of aluminum with the electrochemical protection of zinc.   It is also known as Galvalume Steel Coil.The production process of aluminum-zinc-plated steel coils adopts a continuous hot-dip plating method.

Product IntroductionsCharacteristics of galvanized metal coilExcellent anti-corrosion propertyThe zinc layer on the floor of the galvanized metal coil can efficiently isolate the direct contact between the metal plate and the exterior environment, thereby stopping the metal plate from being corroded.

Product IntroductionsAluminized zinc corrugated plate is a kind of metal material based on aluminized zinc steel plate. Its coating is composed of 55% aluminum, 43.4% zinc and 1.6% silicon, which has both the barrier protection function of aluminum and the sacrificial protection function of zinc. The material has a strong corrosion resistance, life of more than 20 years, and can still maintain stable performance at 315℃ high temperature environment.

Product IntroductionsHighway guardrail is the principal shape of semi-steel guardrail, which is a non-stop shape linked by using corrugated metal guardrail plates and supported by means of the important column.

Product IntroductionsWith its unique structure and material advantages, Sigma Post high-speed guardrail column plays an important role in highway construction.

Product IntroductionsThree wave guardrail plate is a common road traffic safety facilities, mainly used in highways, urban roads, Bridges, tunnels and other places as separation walls and protective devices. The following is a detailed introduction to the three wave guardrail plate:Structure and characteristicsSanbo guardrail plate is extruded by high quality Q235 hot rolled steel plate, after galvanized treatment, has good anti-corrosion performance and long service life.

Product IntroductionsHigh-speed guardrail sigma column is a kind of anti-corrosion function, can be customized and in line with international standards of anti-collision guardrail column, often used for highway safety protection.

Product IntroductionsHighway guardrail is an necessary visitors protection facility, frequently used to separate motor vehicles, non-motor automobiles and pedestrians, enhance avenue visitors safety, enhance site visitors order1.

Product IntroductionsHighway double-wave guardrail is an necessary site visitors security facility, which is in the main used to forestall out-of-control cars from speeding out of the avenue and make sure using safety.

Product IntroductionsHighway guardrail is the main form of semi-steel guardrail, which is a continuous structure connected by corrugated steel guardrail plates and supported by the main column.

Product IntroductionsThree-wave guardrail plate is a semi-steel guardrail, composed of corrugated steel plate splicing, through the column support to form a continuous structure. Its name comes from the board design has three waveforms, compared with the double-wave guardrail plate, has stronger impact resistance and higher collision avoidance level, especially suitable for high protection requirements such as highways. The three-wave guardrail plate absorbs collision energy through deformation, forcing the out-of-control vehicle to change direction and ensure driving safety.

Product IntroductionsHighway guardrail is an important traffic safety facility, mainly used to separate motor vehicles, non-motor vehicles and pedestrians, improve road traffic safety, improve traffic order1.

Product IntroductionsHighway double-wave guardrail is an important traffic safety facility, which is mainly used to prevent out-of-control vehicles from rushing out of the road and ensure driving safety.

Product IntroductionsHigh-speed guardrail bolt is an important part of highway safety protection, its main function is to firmly connect the corrugated guardrail plate to the steel column, forming a strong protective barrier.

Product IntroductionsU-shaped posts, as an important type of road safety facility, are widely used in various traffic scenarios such as highways, urban roads and rural roads.

Product IntroductionsThe C-pillar is a component widely used in many fields, especially in the field of construction and guardrail. With its unique shape and good mechanical properties, C-column plays an important role in different application scenarios. The design of C-column makes it have high structural strength and stability. Its thin-wall structure and opening design not only reduce the self-weight, but also improve the bending and torsional resistance. C-column opening design for easy machining and installation.

Product IntroductionsThe spacer is usually made of high-quality low carbon steel to ensure its good mechanical properties and durability. The manufacturing process includes hot-dip galvanizing and electrostatic spraying, etc., to improve the anti-corrosion performance and service life of the block. The participation of the spacer can distribute the collision force to more span structures, thereby increasing the overall strength of the guardrail and improving the safety of the road.

Product IntroductionsGalvanized steel coil is the steel coil treated by hot dip galvanizing process, and the surface is covered with a zinc layer, which has excellent corrosion resistance and weather resistance.

Product IntroductionsG550 galvanized coil is a steel product that is widely used in many fields and is favored for its excellent corrosion resistance and mechanical properties. Its main uses include automobile manufacturing, metal products, machinery manufacturing, rail transit, pressure vessels, nuclear power, chemical equipment and food machinery.Material characteristicsThe G550 galvanized coil is made of Q550, which is a high-strength steel that is further enhanced by galvanizing its corrosion resistance and service life.

Product IntroductionsHighway guardrail is usually used for toll road protection protection, and its fundamental features consist of setting apart vehicles, pedestrians and non-motor automobiles to forestall site visitors accidents.